Bilberry extract and blueberry extract are often listed side by side in supplement catalogues, sometimes at the same declared percentage of anthocyanins and at very different prices. They are not the same raw material, and choosing between them is not simply a matter of picking the cheaper line. The decision affects the anthocyanin profile in your finished formula, the claim you can substantiate, the colour of the powder, and how stable the product stays on the shelf.
First, agree on what you are measuring
Anthocyanins are the glycosylated forms found in the plant; anthocyanidins are the aglycones left after the sugar is removed. Most commercial specifications are written as "anthocyanidins" or "anthocyanins" by UV-Vis, while a chromatographic assay reports individual glycosides. Two extracts declared as 25% can therefore contain quite different amounts of active pigment. Before comparing quotations, ask which method and which reference standard the certificate of analysis uses, and whether the figure is on a dried basis. This one step avoids most of the confusion in this category.
What each fruit actually contains
Bilberry (Vaccinium myrtillus) is the classic European source. Its anthocyanin fraction is dominated by delphinidin and cyanidin glycosides, and the extract is usually standardised at 25% anthocyanidins, with a deep blue-violet colour and a long record of use in eye health formulations. Blueberry (Vaccinium angustifolium and V. corymbosum) carries a broader mix of delphinidin, cyanidin, petunidin, malvidin and peonidin glycosides, and is commonly offered at 25–40% anthocyanins or as a juice powder. Blueberry material is generally more available and more economical at scale; bilberry carries a premium because the wild raw material is seasonal and limited.
Where the difference matters for formulation
For eye health and visual fatigue products, bilberry is the ingredient most formulators still specify first, and it is the easier story to tell in a label. For antioxidant blends, beauty-from-within, women's health and general immune support, blueberry anthocyanins work just as well and cost less per unit of pigment. If your marketing leans on the anthocyanin content itself rather than the botanical name, blueberry is often the more efficient choice; if it leans on the traditional bilberry positioning, substituting quietly is not advisable.
Stability is the real constraint
Anthocyanins are unusually sensitive for a plant extract. They are pH-dependent, shifting from red at low pH toward purple and blue as pH rises, and they degrade with heat, light, oxygen and prolonged exposure to ascorbic acid. In a beverage, that means choosing the buffer system before choosing the extract grade. In a capsule or tablet, it means keeping moisture low and avoiding alkaline excipients and iron. And in any application where the colour is part of the product, the powder must be colour-matched batch to batch, not just assay-matched. A specification that states only "25% anthocyanidins" tells you nothing about shade, particle size or solubility — all of which decide whether the production run looks right.
Bilberry extract also carries tannins and other polyphenols that contribute bitterness and astringency, which matters in gummies and ready-to-drink formats. Blueberry juice powder is milder and easier to flavour, but its pigment load per gram is lower, so larger doses are needed to reach the same anthocyanin intake.
A practical selection checklist
Decide first whether the claim is botanical or pigment-based. Then specify the assay method, the percentage on a dried basis, the moisture limit, the heavy-metal and pesticide limits, and the microbiological standard. Ask for a retained sample from the production lot, not only a certificate, and run a small stability trial at your intended pH and water activity before committing to a container load. For organic or clean-label projects, confirm whether an organic grade is available from the same raw-material chain, since switching sources later usually means re-labelling.
Why the source matters as much as the spec
Xi'an Longze Biotechnology has been working in anthocyanins since 2009, operates two cGMP-compliant production plants, and maintains an organic raw material planting and processing base in Jilin. The company holds ISO 9001, FSSC 22000, HACCP, HALAL and KOSHER certification, and its anthocyanin series — including bilberry extract standardised at 25% anthocyanidins and blueberry anthocyanins — is supplied to food, beverage, cosmetic, pharmaceutical and dietary supplement manufacturers in domestic and export markets. Fruit and vegetable powders are produced by juicing, vacuum concentration and spray drying, which preserves both taste and trace components.
If you are comparing bilberry and blueberry grades for an eye health or antioxidant formula, send us your target dose, dosage form and pH range, and we will recommend the grade and documentation package that fits.
Learn more at www.plant-herb.com
www.plant-herb.com
Xi’an Longze Biotechnology Co., Ltd.
