Thursday, 19 November, 2026

How to Check Veterinary Test Strips for Humidity Damage


Anyone running coagulation or chemistry panels on lyophilized veterinary test cartridges knows the instructions always say to keep reagents at 2-8°C and watch the shelf life, but nobody really explains how to tell if a strip or pouch has already taken on moisture before you load it.

879249140ae21fcb2d8f0c0a164c0e7e

The reason this matters is that lyophilized reagents are freeze-dried specifically so they stay stable in storage, and that stability depends on the pouch staying sealed. Once a pouch is opened or punctured, humidity starts interacting with the dried reagent layer, which can throw off readings without giving any obvious visual warning on a quick glance. On some veterinary combo systems the chemistry side needs around 140 µL of sample and the coagulation side needs about 180 µL, with results expected in well under 15 minutes, so there isn’t a lot of room in the workflow to catch a bad reagent mid-run and start over.

The practical trade-off seems to be between trusting the single-test, individually pouched packaging as sufficient moisture protection versus adding an extra manual check before every run, especially in clinics that don’t have tight climate control in the room where strips are stored. A visibly intact pouch with no discoloration or clumping is usually the baseline check people rely on, but that doesn’t confirm internal humidity exposure the way a desiccant indicator or controlled run might.

For anyone working with individually pouched lyophilized veterinary reagents, what’s the actual field method for confirming a strip hasn’t absorbed moisture before trusting the result, beyond just checking that the pouch looks sealed?

https://www.vivachek.com
Hangzhou Weice Biotech Co., Ltd.

0 comments on “How to Check Veterinary Test Strips for Humidity Damage”

Leave a Reply

Your email address will not be published. Required fields are marked *