For those who understand the slitting line, most of them know that the balance of the slitting line has a great influence on us. As long as the superposition is correct, the bite angle can be ensured. If the superposition is too large and the bite angle is too small, the torque will also increase. However, if the stack is too small, continuous clipping will occur.<\/p>\n

At the same time, it is necessary to ensure the continuity of the slitting line in the cutting time, because the slitting line will locally jump during operation, so the axis needs to be set reasonably to prevent the adverse effects of similar problems and ensure the accuracy of the selection.<\/p>\n

At the same time, the selection of the slitting line is also related to the thickness, tension and tensile strength of the strip. In addition, the accuracy of the tool is another aspect that needs to be considered, which has an impact on continuous shearing. If there is a gap between the cutter axis and the inner hole of the cutter, it will cause the cutter to deviate during movement. If the offset is too large, intermittent shearing will occur. With the continuous development of slitting line manufacturers, the stacking quantity of slitting lines can now be adjusted, and digital automation is adopted, making our operations more convenient and greatly reducing the probability of problems.<\/p>\n

The above is what the editor of the slitting line manufacturer explained. Do you all understand it? Thank you everyone for watching, and we will see you in the next issue.<\/p>\n