Monday, 16 November, 2026

DKM PET Preform Machine: Fast Delivery, Precise Cycles


Understanding the Demand Behind "DKM PET Preform Machine"

Buyers searching for a DKM PET preform machine are typically evaluating equipment for water and carbonated beverage preform production, where the core requirements are short equipment lead times, high-cavity output capability, consistent shot weight across cavities, and manageable energy costs. DKM Machinery, operating alongside SINO MOULD within the DKM-SINO MOULD technology ecosystem, addresses these requirements through a dedicated PET preform machine lineup, matched molds, and integrated automation — delivered as either standalone equipment or a complete turnkey production line.

The DKM-PET III Series: Machine Specifications and Models

The flagship offering for PET preform applications is the DKM-PET III Preform-Dedicated Injection Molding Machine, available in four models: DKM-350 PET III, DKM-450 PET III, DKM-550 PET III, and DKM-650 PET III. Each model is matched to a specific cavity range:

  • DKM-350 PET III pairs with a 48-cavity line
  • DKM-450 PET III pairs with a 72-cavity line
  • DKM-550 PET III pairs with 144-cavity and 168-cavity preform molds
  • DKM-650 PET III pairs with a 144-cavity production line

This structured matching between machine tonnage and cavity count is designed to simplify configuration decisions for producers scaling from smaller to high-cavity operations.

Technical Performance of the DKM-PET III Series

Three engineering features define the DKM-PET III series’ positioning for high-cavity PET preform work. First, a standard electric accumulator for synchronized plasticizing, combined with post-mold cooling technology, is used to shorten the molding cycle. Second, nano far-infrared heating rings are applied to reduce production energy consumption. Third, an optimized machine frame structure supports an injection repeat accuracy of ≤0.5‰, a figure specifically aimed at maintaining shot-weight consistency across large cavity counts, where even minor injection variance can compound into significant part-to-part deviation.

1ed63cec0939011463e20f32f0908dca

Documented cycle performance illustrates how these features translate into output: a 144-cavity preform mold running on the DKM-650 PET III achieves a 12.8-second cycle producing an 11g, 29mm neck preform; a 168-cavity mold on the DKM-550 PET III produces an 11g product with a BPF 26/21 neck in an 11-second cycle; a 72-cavity standard line paired with the PET 450 machine achieves a 12-second cycle for a 12g, 28mm preform; and a 48-cavity standard line with the PET 350 machine achieves a 16-second cycle for the same 12g, 28mm preform specification.

Beyond the Machine: The Complete PET Preform Production Line

A standalone injection molding machine is only one component of a functioning preform operation. DKM’s PET Preform Production Line integrates the preform mold, the DKM-PET III injection molding machine, and an out-mold take-out robot into a single pre-commissioned system. Three standard configurations are offered:

  • Standard 1: PET 650 machine, 144 cavities, take-out robot, 11g/29mm preform, 12.8-second cycle
  • Standard 2: PET 450 machine, 72 cavities, dual-station external cooling robot, 12g/28mm preform, 12-second cycle
  • Standard 3: PET 350 machine, 48 cavities, three-station external cooling robot, 12g/28mm preform, 16-second cycle

For preforms under 16g, the Out-Mold Cooling & Pick Robot performs cooling directly on the robot gripper during part removal. For heavier preforms above 16g, robot gripper cooling is combined with multi-station cooling units — a distinction designed so that heavier preforms do not require an extended in-mold cycle simply to achieve adequate cooling.

Mold Supply: SINO MOULD’s Role in the PET Preform Chain

Machine performance depends heavily on mold precision, which is where SINO MOULD and its subsidiary SINO-PK contribute. Their PET Bottle Preform Mold line spans from 8 to 168 cavities, built with key components in Swedish S136 steel (HRC45-48) and a mold base in DIN1.2311. Tolerances are held to 0.01mm for uniform wall thickness and concentricity, with a precision capability down to ±0.005mm. Standard neck finishes include PCO 1810, PCO 1881, and 28mm necks for preform weights typically between 12g and 30g.

On delivery timing, standard 48/72-cavity molds are produced in 1 to 2 weeks, with a 48/72/96-cavity single-week delivery program also available for producers under tighter scheduling pressure. Custom non-standard preform molds — covering special neck finishes, unique bottle designs, or mixed-cavity configurations — require 5 to 7 weeks. SINO MOULD states it has delivered over 200 sets of standard PET preform molds worldwide, and an intelligent standardized production workshop has been operational since October 2025, supporting this delivery cadence. A 3-year mold warranty with free spare parts during the warranty period is also provided.

Delivery Timelines and Supply Chain Assurance

For producers whose primary concern is time-to-production, DKM maintains safety stock for PET preform-dedicated machines across the 350T, 450T, 550T, and 650T models, along with auxiliary equipment. This stock strategy supports the stated delivery commitment: standard PET preform production lines with 48/72-cavity configurations and standard 28/38mm neck finishes are delivered within 14 days from order confirmation to qualified shipment, while custom or non-standard applications are delivered in 5 to 7 weeks. All standard configurations undergo pre-factory acceptance testing under simulated production conditions before shipment, intended to reduce on-site commissioning time after delivery.

Documented Field Performance

Two 144-cavity PET preform production lines are reported to be currently operating — one in Iraq and one in Iran — both under normal production with customer acceptance test reports confirming satisfactory performance and full payment settled for both projects. Separately, a 72-cavity PET preform production line with an out-mold cooling system has produced a 13.5g, 28mm neck preform at a 12-second cycle time.

924cb822509307dd6de3514d0239f606

What This Means for Prospective Buyers

For a producer evaluating a DKM PET preform machine, the relevant decision factors converge on four points: cavity-to-tonnage matching across the DKM-350 through DKM-650 PET III range, documented cycle times from 11 to 16 seconds depending on configuration, an injection repeat accuracy of ≤0.5‰ for multi-cavity shot consistency, and a 14-day standard delivery window backed by safety stock and pre-factory testing. Combined with SINO MOULD’s precision mold capability and a 3-year mold warranty, the offering is structured to address the preform industry’s recurring concerns around lead time, output consistency, and equipment reliability within a single supply relationship.

https://dkm.com/pet-preform-molding-machine/
DKM Machinery

0 comments on “DKM PET Preform Machine: Fast Delivery, Precise Cycles”

Leave a Reply

Your email address will not be published. Required fields are marked *