Yifa Burner system and burners: high temperature and super high accuracy, low energy consumption, the design of furnace is the first class in China. About show in pictures: At first show the other factory pictures:
Yifa entire insulation structure of the furnace cannot be fully displayed, as it involves our unique design; The insulation thickness far exceeds that of other factory, and they cannot compare with mine; You will be surprised that the insulation performance is the best in China. In this blog post, Yifa will share the features of online annealing furnace for sale, including parameters, furnace structure, etc.
Fuel used in heat treatment furnace: natural gas
Specification:
|
No. |
Item |
Specification |
|
1 |
Type of fuel |
Natural gas |
|
3 |
Length furnace |
27.5m |
|
5 |
Number of heating sections |
4 |
|
7 |
Max Temperature |
950℃ |
|
8 |
Heating Method |
Side Heating |
|
9 |
Number of burners |
28 |
|
10 |
Approve lines |
40 |
|
11 |
Furnace temperature control accuracy |
±3℃ |
|
12 |
Waste heat recovery and heat exchange device type |
High efficiency plug-in tubular heat exchanger |
Furnace structure of online annealing furnace for sale
1. Furnace type:
• The whole furnace adopts countercurrent open fire heating type, each section controls temperature and adjusts atmosphere separately. Using gas heating technology, the main characteristics of the furnace type are: open flame heating, oxygen and oxygen combustion and control.
• Total thermal risk control technology can maximize gas energy consumption and reduce production and operating costs compared to other furnace types. Temperature control, wind and gas ratio coefficient, safety failure, etc. are fully controlled by the program.
• The whole furnace is composed of multiple furnace bodies, and the wire inlet is respectively equipped with a heating section, a heating section, a heating section, a heating section and a heating section. Each section of heating is relatively independent and influences each other.
According to the requirements of heat treatment process, the furnace temperature and atmosphere can be set in stages to meet the requirements of process treatment. The steel wire is held up by a supporting brick in the furnace section to keep a certain distance between the steel wire and the furnace.
2. Gas supply main and combustion safety system
The gas supply main pipe is composed of electric regulating valve and solenoid valve. The system can operate only when the air and gas pressure are stable and normal. If the gas pressure does not meet the technical requirements or the power supply system fails, the gas quick cut valve is cut off. Only when the power supply is normal and the gas and air pressure meet the specified requirements, can the safety valve be opened to make the gas enter the combustion system, which can effectively ensure the safe operation of the entire system.
Gas and hot air pipes are made of high-quality seamless steel pipe, flange connection. All the pipes are fixed on the top of the furnace and the steel structure supports on the side, arranged neatly for easy maintenance. The hot air pipe is covered with thermal insulation.
3. Automatic control system and instrument detection device
• The gas pressure regulator is set in front of the furnace to ensure the stable operation of the control system.
4. Electrical configuration:
Heat treatment computer control system includes Germany Siemens S7 series PLC and Taiwan Advantech brand industrial computer IPC.
• The system has two control modes: manual and automatic.
• The upper computer software adopts Siemens Wincc or brand configuration software, and the lower computer is Germany Siemens S7 series PLC.
https://www.yifam.com/Features-of-Online-Annealing-Furnace.html
www.yifam.com
Yifa
