Saturday, 22 June, 2024

Maintenance of water injection pump


https://www.nbhelipump.com/Maintenance-of-water-injection-pump.html

water injection pump is a device used to inject water into oil wells, and it plays a vital role in oil field development. In order to ensure the normal operation of the water injection pump, regular maintenance and upkeep must be carried out. This article will introduce the maintenance and upkeep of the water injection pump in terms of regular inspection, lubrication, seal replacement, etc.

RBwBEmPwP1KANTTsAAI9I65Wpi4204

Periodic inspection

Regular inspection is an important part of ensuring the normal operation of water pump injection. During inspection, the following points should be noted:

1. Check the appearance of the pump for damage or corrosion. If so, replace it in time.

2. Check whether all parts of the pump are tight. If they are loose, tighten them in time.

3. Check whether the inlet and outlet pipes of the pump are smooth. If there is any blockage, clean it in time.

4. Check whether the electrical equipment of the pump is normal. If there is any fault, repair it in time.

Lubricating

Lubrication is an important means to ensure the normal operation of the water injection pump. When lubricating, the following points should be noted:

1. Lubricating oil should be of appropriate brand and specification, and added according to the specified refueling amount.

2. Lubricating oil should be replaced regularly to ensure its performance and quality.

3. The lubricating oil should be kept clean and free from impurities and moisture.

Seal replacement

Seals are an important part of ensuring the normal operation of water pump injection. When replacing seals, you should pay attention to the following points:

1. Before replacing the seal, the water in the pump should be drained first to prevent the water in the pump from flowing into the seal.

2. When replacing seals, appropriate materials and specifications should be selected and replaced according to the prescribed methods.

3. After replacing the seal, a test run should be performed to ensure that the sealing effect is good.

To sum up, the maintenance and upkeep of water pump injection is an important part to ensure its normal operation. Only when regular inspections, lubrication, seal replacement and other tasks are done well can the long-term stable operation of the water injection pump be ensured and provide reliable guarantee for oil field development.

https://www.nbhelipump.com/How-the-water-injection-pump-works.html

https://www.nbhelipump.com/70-of-the-failures-of-high-pressure-water-injection-pump-are-caused-by-poor-lub.html

https://www.nbhelipump.com/Water-injection-pump-key-equipment-to-improve-oil-field-recovery-efficiency.html

https://www.nbhelipump.com/Water-injection-pump

Vivi
jyk@nbgyb.com.cn

0 comments on “Maintenance of water injection pump

Leave a Reply

Your email address will not be published. Required fields are marked *